Urinal flush valves
The advantages of flushing valves: The Walcro flushing valve provides an instantaneous, repeatable and vandal resistant flushing system. The flushing valve excels in high volume traffic usage and can easily cope with consecutive flushing where a cistern and sewerage could fail with inadequate water delivery with only partially filled cisterns being flushed. The Walcro flushing valves are adjustable on site to ensure that only the required quantity of water is used to promote water saving.
Urinal top entry exposed valve
Urinal top entry exposed valve
Walcro 330UR exposed 15 mm BSP urinal flush valve. Made from DZR brass and designed for single bowl urinals. Not recommended with trough urinals. The Walcro 330UR is similar to the Cobra FJ6.000 Junior Flushmaster exposed valve. Pressure range: 100 kPa – 600 kPa. Can be used with either with the UR15TP flush pipe for top entry or the 103/6 flush pipe with spreader.
Walcro W-103UR Exposed 20 mm urinal flush valve
Walcro 330UR exposed 20 mm BSP urinal flush valve. Made from DZR brass and designed for single bowl urinals. Not recommended with trough urinals. Pressure range: 30 kPa – 600 kPa. Can be used with either with the UR15TP flush pipe for top entry or the 103/6 flush pipe with spreader.
Walcro 550URV Exposed 20 mm urinal flush valve
Walcro 550URV exposed 20 mm BSP urinal flush valve. Made from DZR brass and designed for single bowl and trough urinals. Recommended with trough urinals. The number of flush valves per trough urinal will depend on the length of the urinal. So more than one unit might be required for proper flushing. Pressure range: 30 kPa – 600 kPa. Can be used with either with the UR15TP flush pipe for top entry or the 103/6 flush pipe with spreader.
Exposed press front button urinal flush valve
Press urinal flush valve with 1/2″ brass inlets. Does not come with a stop valve. GROHE StarLight® chrome finish with control cap and flush pipe connection. Comes standard with 3 adjustable flow times: short – medium – long (factory setting: short), Flow time approx. 7, 15, 30 sec (pressure dependent). Comes with a wall escutcheon and a 200 mm flush pipe. Operating pressure max 5 bar and flow pressure min 1.0 bar.
For use with top entry wall hung urinals. Flush volume 2-6 L.
Exposed press top button urinal flush valve
Press urinal flush valve with 1/2″ brass inlets. Does come with an integrated stop valve. GROHE StarLight® chrome finish with control cap and flush pipe connection. Comes standard with flow rate adjustment: flush 1.0 – 4.0 L. Comes with a wall escutcheon and a 200 mm flush pipe. Operating pressure 0.5 – 5 bar and flow pressure min 1.0 bar.
For use with top entry wall hung urinals. Flush volume 1-4 L.
Exposed manual top entry bowl urinal flush valve
The Schell exposed urinal flush valve is a ideally suited for commercial and industrial installations. It has a robust all-metal body with brass push button. High reliability thanks to corrosion proof plastic cartridge and integrated jet cleaning and pre-filter. The flush valve is manufactured according to European EN 12541 standards. Maintenance is made easy by the integrated isolating valve. 0.8-5.0bar. flow volume 0.3 l/s.
For use with top entry wall hung urinals. Flush volume adjustable 1-6 L.
Concealed urinal flush valves
Walcro 155UR concealed flush valve with flange
Specifications for the built in urinal valve designed for single bowl urinals. 15mm BSP DZR with internal flow control, strainer, no- hold feature and chrome wall plate. Operating pressure: 30kPa – 600kPa. Made from DZR brass so it is suitable for South African water conditions. Please install an inline strainer before these valves to reduce maintenance and reduce the change of leaking or blocked valves. If the valve does not want to close the chance is good that it has dirt inside which must be removed. Replacement cartridges are available. Service cartridge’s code: W-S/W-15599 and complete service cartridge, including the button assembly is W-S/W-155100. Wall plate W-S/W-15570.
Vandal resistant urinal flush valve with stainless steel sleeve
Specifications for the built in urinal flush valve. It is designed for single bowl urinals or prison hand wash basins. 15mm BSP female thread made from DZR brass with internal flow control, strainer, no- hold feature and steel sleeve. Ideal for vandal proof installations such as prison cells, mining bathrooms and industrial factories. Operating pressure: 30 – 600 kPa (±0.3 – 6 Bar).
- Complete urinal service cartridge: W-S/W-155100
- Service cartridge, plastic part: W-S/W-15599.
Boxed concealed urinal flushing valve with sleeve
The Walcro 107CHP-UR concealed flushing valve for use with single bowl urinals. Water inlet 20 mm BSP DZR brass. Comes with stainless steel cover plate and XP button. Operating pressure range: 100 kPa – 600 kPa (±1 – 6 Bar). Ideal for installations were exposed flush valve might be vandalized. The unit must be installed into the wall with the inlet to the urinal at the back. Not pipes are thus exposed except those of the urinal p-trap. Urinals with hidden p-traps are also available.