Stainless Steel P1 pot sink
Pot sink (model “P1”) single center or end bowl sink (please specify whether bowl position must be left or right) manufactured from grade 304 stainless steel 1,2 mm thick with a 150 mm high integral splash back to the back and 50 x 10 mm turn down with a beaded edge on the remaining sides. The Pot sink is available either with a fabricated 760 x 460 x 380 mm deep bowl or a 600 x 500 x 300 mm pressed bowl. Both models have a 40 mm waste outlet. The underside is sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanized mild steel backing sheet. Unit fixed 900 mm high from the top of the front apron to the finish floor level with anchor bolts (bolts specified elsewhere). The pot sinks can be used as freestanding units with either round or square legs or they can be fixed to a wall with gallows brackets which come with a detachable front leg. These units can also be supplied without any fixing options, to be used as drop-on units mounted on top of cabinets. Please refer to fixing table for fixing options.
Features of the P1 pot sink
- Fabricated bowls 760 x 460 x 380 mm deep or pressed bowls 600 x 500 x 300 mm
- Grade 304 (18/10) Stainless Steel 1.2 mm gauge
- Fully sound deadened with galvanized backing sheet
- Hospital bead to prevent spillage
- 133 Litre Bowl Capacity
Options for the P1 pot sink
- Stainless steel solid under shelf
- Stainless steel slatted under shelf
- Non-
standard available sizes upon request - Splash backs to ends or to left and right upon request
P1 1500mm single bowl pot sink with solid undershelf and wall mounted commercial grade mixer (CO-166/041/NV)
1500mm single bowl pot sink
1500mm single bowl pot sink with slatted undershelf
1500mm single bowl pot sink with solid undershelf
1850mm single bowl pot sink
1850mm single bowl pot sink with slatted undershelf
1850mm single bowl pot sink with solid undershelf
2400mm single bowl pot sink
2400mm single bowl pot sink with solid undershelf
2400mm single bowl pot sink with solid undershelf
Special heavy industrial P1 pot sink with tap braces.
Specialized slop sink with tap brackets on top and stabilizers at the back. Standard 38mm sink waste.
Similar products
Standard 2700mm triple bowl pot sink
