Sales/Quotes:   012 809 4026

S1 Single bowl catering sink

Single bowl catering sink (Franke model “S1” ), bowl positioned at the end or center (please specify when placing orders or requesting quotes). The S1 catering sink bowl’s are manufactured from grade 304 stainless steel and are 1,2 mm thick with a 150 mm high integral splash back to the rear and 50 x 10 mm turn down with a beaded edge on the remaining sides. The S1 catering sink with a pressed 500 x 500 x 230 mm deep bowl comes with a 40 mm waste outlet. The underside of the sink’s bowl is sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanized mild steel backing sheet. The single bowl catering sink can be fixed 900 mm high from the top of the front apron to the finish floor level with anchor bolts (bolts specified elsewhere). The catering sinks can be used as freestanding units with either round or square legs or they can be fixed to a wall with gallows brackets which come with a detachable front leg. These units can also be supplied without any fixing options, to be used as drop-on units mounted on top of cabinets. Please refer to fixing table for fixing options.

Features of the S1 catering sink

  • Pressed bowls 500 x 500 x 230 mm deep
  • Grade 304 (18/10) Stainless Steel 1.2 mm gauge
  • Fully sound deadened with galvanized backing sheet
  • Hospital bead to prevent spillage
  • 57 Litre Bowl Capacity

Optional accessories

  • Stainless steel solid under shelf
  • Stainless steel slatted under shelf
  • Non- standard sizes upon request
  • Splash backs to right or left ends
S1 Single bowl Catering Sink models
Order codeProduct code
(Old / New)
Length X width X height (mm)Bowl position
S1-1200L353106 / 26200161200x650x1050Left
S1-1200R353102 / 26200151200x650x1050Right
S1-1200C353104 / 2620258 1200x650x1050Center
S1-1500L350004 / 2620005
S1-1500R353152 / 2620021
S1-1500C353154 / 2620021
Single bowl catering sink installation with slatted under shelf
Lifestyle rendering of a single left hand catering sink with an optional slatted under shelf. An optional tap is installed in the corner of the table. On the wall a Infra Red hands free hand dryer (also optional)
Franke S1 stainless steel catering sink diagram top
Diagram of the 1500 mm single bowl catering sink. 1200 mm versions also available.
double bowl catering sink measurements
Side view of the catering sink. Note the height of the work surface is 900 mm. With the splashback it is 1050 mm.